Overview
Specification
Expansion/Accessories
Software
Support
Upgrade Path
The MC206X Motion Coordinator is based on Trio’s high-performance 32-bit DSP technology, providing unprecedented computational speed, flexibility, and connectivity.
Highlights
- Compact 107mm(H) x 182mm(W) x 53mm(D)
- Compact DIN-rail mounting box
- Pre-emptive multi-tasking TrioBASIC, maximum of 7 tasks
- Motion Perfect Application Development Software
- CAN Networking
- Multifunction Status LEDs
- UL Listed and CE Approved
Programming
Advanced FPGA techniques enable 4 axes of stepper and servo circuitry plus a master encoder input to be enclosed in a compact DIN-rail mounted package
Expansion
The MC206X has 16 opto-isolated digital I/O (8 in, 8 bi-directional). High speed hardware registration inputs are available for each axis where highly accurate control is required for applications such as print and packaging lines. The I/O count can be expanded using Trio CANbus digital and analogue modules.
Communication
Trio’s MC206X offers wide communications capability with 2 RS-232 serial ports, 1 RS-485 port, 1 TTL serial port, 1 USB port and 1 CAN channel as standard.
 |
|---|
| Product | P136 MC206x |
|---|---|
| Description | 1-5 Axis motion coordinator |
| Name | MC206x |
| PCode | P136 |
| Status | Maintained |
| Configuration | P136 MC206x |
|---|---|
| Axis 0 | |
| Axis 1 | |
| Axis 2 | |
| Axis 3 | |
| Axis 4 | |
| Axis 5 | |
| Axis 6 | |
| Axis 7 |
| Axes | P136 MC206x |
|---|---|
| Max axes | 5 |
| Max networked axes | 0 |
| Max virtual axes | 1 |
| Max discrete wired axes | 4 |
| Performance | P136 MC206x |
|---|---|
| Cores | 1 |
| Processor | DSP |
| Clock frequency | 120 MHz |
| Maths precision | IEEE 457 Single |
| Position register precision | 32 bit |
| Execution benchmark | 0 lines/ms |
| Real-time clock | No |
| Flash memory | 32000 values |
| User memory | 1 MB |
| Table memory | 32000 values |
| Min expected flash memory life (normal use) | 0 years |
| Maximum VR variables | 1024 |
| Maximum servo period | 2000 µs |
| Minimum servo period | 125 µs |
| Maximum encoder input frequency | 6.000 MHz |
| Maximum stepper output frequency | 2.000 MHz |
| Drive interfaces | P136 MC206x |
|---|---|
| Auxilliary axis | Option |
| EtherCAT | No |
| Hydraulic | Option |
| Piezo | Option |
| Panasonic RTEX | No |
| SERCOS | Option |
| Servo | Option |
| SLM | Option |
| Step & direction | Yes |
| Communications | P136 MC206x |
|---|---|
| Anybus | No |
| Bluetooth | No |
| CANopen | Yes |
| CC-Link | No |
| DeviceNet | Yes |
| Ethernet | Option |
| EthernetIP | Yes |
| Hostlink | Yes |
| MODBUS-RTU | Yes |
| MODBUS-TCP/IP | Yes |
| Profibus | Option |
| ProfiNet | No |
| RS232/RS485 | Yes |
| USB 1.1 | Yes |
| Encoder ports | P136 MC206x |
|---|---|
| Feedback input | No |
| Incremental (A+B) output | Yes |
| Pulse & direction output | Yes |
| Reference input | Yes |
| SSI Absolute Input | No |
| EnDat Absolute Input | No |
| Tamagawa Absolute Input | No |
| BiSS Absolute Input | No |
| Internal I/O | P136 MC206x |
|---|---|
| +/-10V analogue outputs | 4 |
| Analogue output precision | 12 bits |
| Analogue Inputs (0-10V) | 2 |
| Analog input precision | 12 bits |
| Digital Bidirectional I/O (24V) | 4 |
| Digital Inputs (24Vdc) | 8 |
| Digital outputs (24Vdc) | 0 |
| Registration inputs | 4 |
| Registration speed | 20 µs |
| Watchdogs | 1 |
| Watchdog rating | 29V, 100mA max |
| External I/O | P136 MC206x |
|---|---|
| +/-10V analogue outputs | 16 |
| Analogue output precision | 16 bits |
| +/-10V analogue inputs | 32 |
| Analogue input precision | 12 bits |
| Digital I/O points | 256 |
| Programming | P136 MC206x |
|---|---|
| Trio BASIC | Yes |
| DXF in | Yes |
| G-Code | Yes |
| HPGL | Yes |
| IEC61131 | No |
| Kinematic | No |
| Maximum programs | 7 |
| Maximum tasks | 7 |
| Software | P136 MC206x |
|---|---|
| Motion Perfect version | 3 |
| Expansion | P136 MC206x |
|---|---|
| Expansion module type | Series2 |
| Maximum modules | 1 |
| Memory card | None |
| Physical | P136 MC206x |
|---|---|
| Maximum operating temperature | 45 °C |
| Minimum operating temperature | 0 °C |
| Mount | DIN/Panel |
| Depth | 53.0 mm |
| Height | 107.0 mm |
| Width | 182.0 mm |
| Weight | 325 g |
| Power | P136 MC206x |
|---|---|
| Supply current | 350 mA |
| Supply tolerance | |
| Supply voltage | 24 V |
| Certification | P136 MC206x |
|---|---|
| CE | Yes |
| RoSH | Yes |
| UL | Yes |
| Products - Expansion |
|---|
Daughter Board Adaptor (P399)  Required to fit any daughter board to the MC206X. UL Approved. |
Micro SD Card Adaptor  Allows the controller to read and write files as a Flash drive using the FAT32 compatible file system. The memory adaptor is compatible with a wide range of Micro SD cards up to 2Gbytes. |
RS232 serial Cable (P350)  Provides 4 +/-10V, 16 Bit outputs. Includes 4 x 0-10V analogue inputs 12 Bit. |
Serial to Fibre Optic Adaptor (P435)  Fibre optic adaptor to convert TTL port on MC224, MC206X and Euro205x series Motion Coordinators to Trio fibre optic network. |
All Daughter Boards Daughter Board System to allow for extended interfacing. Please call Trio for availibility. |
| Products - CAN I/O Modules |
|---|
CAN 16-Out I/O Module (P317) The Trio CAN16 Output module provides 256 distributed output channels at 24Vdc level. All points are short-circuit proof and completely isolated from the CANbus. P317 modules may be mixed on the same bus, with other types in the Trio CAN I/O range. |
CAN 16-In I/O Module (P318) The Trio CAN16 Input module provides 256 distributed input channels at 24Vdc level. All input points are high level (24V in = ON) and completely isolated from the CANbus. |
CAN16 I/O Module (P319) The Trio CAN16 Input/Output module provides 256 distributed bi-directional input/output channels at 24Vdc level. All input points are high level, (24V = ON) all outputs are short-circuit proof and the I/O is completely isolated from the CANbus. |
CAN 8-In / 4-Out I/O Module (P326) The CAN Analogue I/O module provides a compact DIN rail mounted analogue input/output capability for Trio Motion Coordinators. Each module provides 8 channels of 12-bit (+/-10V) analogue inputs and 4 channels of 12-bit (+/-10V) analogue outputs. |
CAN 8-Relay Module (P327) The Trio CAN8 Relay module provides 128 distributed low power relay channels at up to 30Vdc or 49Vac. All output points are Volt-free contacts and are completely isolated from the CANbus. P327 modules may be mixed on the same bus, with other types in the Trio CAN I/O range. |
| Products - Generic |
|---|
UNIPLAY HMI (7") (P843) Trio’s unique UNIPLAY HMI system is a revolutionary way to make operator interfaces better, easier and more secure! The UNIPLAY series boasts a 7" and 10" colour display. |
|
UNIPLAY HMI (10") (P844) Trio’s unique UNIPLAY HMI system is a revolutionary way to make operator interfaces better, easier and more secure! The UNIPLAY series boasts a 10" colour display. |
| Firmware - MC206-X | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Normal
Latest USER Release:
|
||||||||
|
Look Ahead
Latest USER Release:
|
||||||||
| Software - Programming |
|---|
|
Motion Perfect Motion Perfect is designed to make setup, diagnostics, commissioning and using our range of Motion Coordinators as simple as possible. It provides the user with an easy to understand Windows based interface for rapid application development, controller configuration and monitoring of controller processes. |
| Software - Support Apps |
|---|
|
CAD2Motion The program allows the user to create motion paths in a CAD package such as AutoCAD and convert them into code executable by a Trio Motion Coordinator. |
|
CamGen CamGen allows import of a set of points from Excel to build a smooth motion profile in a few minutes. CamGen is included in Motion Perfect v4. |
|
AutoLoader A compact, self-contained package designed to allow simple distribution of projects written using Motion Perfect. Simply add the project to the Autoloader folder, edit a script file to provide control of the loading sequence and send to the customer. |
|
Trio MCLoader The Trio MC Loader is a Windows ActiveX control which can load projects (produced with Motion Prefect) and programs onto a Trio Motion Coordinator. Communication with the Motion Cordinator can be via serial link, USB, Ethernet or PCI depending on the Motion Coordinator. |
|
Trio PCMotion PCMotion is an ActiveX component allowing direct connection to the Trio Motion Coordinator from a custom user application. It can be used to control any of the Motion Coordinator functionality as well as send text files down to the controller. |
| Guides | |
|---|---|
| Data Sheet | |
| Quick Start Guide | Simple set up guide |
| Manuals | |
|---|---|
| The Technical Reference Manual can be downloaded in here. | |
| Certificates | |
|---|---|
| EC Declaration | |
| UL Listing | Please insert E238097 UL File Number in the search box. |
| Feature | MC206X | MC405 |
|---|---|---|
| I/O Connectors | 3.81 mm pitch 2-part screw terminals. | 3.5 mm pitch 2-part screw terminals. |
| Max number of Servo Axes | 4 | 4 |
| Ref Encoder Axes | 1 | 1 |
| Max number of Stepper Axes | 4 | 5 |
| 5th axis connector | 3.81 mm pitch screw terminals | 9-way D-type Socket |
| 5V power output on 5th axis | No | Yes |
| Daughter board slots | 1 | 0 |
| Serial Ports | 2 x RS232 and 1 x RS485 | 1 x RS232 1 x RS485 |
| Command Line access | Serial port 0 | Ethernet port only |
| USB port | Yes | No |
| Ethernet port | Optional with P296 | Yes |
| Fibre-optic Keypad port | Requires P435 Serial to Fibre-optic converter. | Not supported |
| Analogue Inputs | 1 x 10bit (0 to 10V) | 2 x 12 bit (0 to 10V) |
| DAC power supply | CAN 24V | I/O 24V |
| Virtual axes | 3 | 11 |
| Multi-tasking processes | 7 | 10 |
| Equivalent processing speed | 1x | 7 x faster than 206X |
| System Software | Trio Multi-tasking BASIC V1 | Trio Multi-tasking BASIC V2 |
